Stripped the VE Rear Cradle, cleaned all the parts ready for paint.
Rear knuckles were very difficult to disassemble, even with correct tools,
Particularly the removal of the backing plate requires the removal of the wheel flange,
The main bearing is a once only use, removing the flanges destroys the bearing inner. *noted in VE/G8 workshop manual. The assembly is so awkward in shape, its difficult to mount in press, so we remounted in the cradle and pressed out from the inside with a car jack.
Also the bushes were difficult to remove, needing some simple custom made pullers to remove, lathed up from some tubes to fit over the bush, then rods and nuts to pull the bush into the tube.
Naked Knuckles
Suspension Arms, Un-modified Front Knuckles on right